Against the backdrop of the accelerating adoption of Wi-Fi 6/6E and tri-band mesh networks, the 5 GHz band is being divided into increasingly narrower frequency channels, and adjacent-channel interference between the UNII1-2a (5170–5330 MHz) band and the adjacent UNII2c-3 bands has become a key bottleneck in RF front-end design. Traditional LTCC or SAW filters have nearly reached their physical limits in terms of roll-off steepness and power handling capability; as a result, bulk acoustic wave (BAW) filters have become the solution of choice for high-density access points, wireless routers, and residential gateways. The Qorvo QPQ1903 is a high-performance, high-power BAW bandpass filter specifically designed to meet this need, delivering low insertion loss across a 160 MHz bandwidth while providing high near-end suppression for adjacent bands.
I. What Is the QPQ1903?
The Qorvo® QPQ1903 is a 5 GHz UNII1-2a bandBoost™ bulk acoustic wave (BAW) bandpass filter in a laminated package measuring just 1.7 mm × 1.1 mm, designed to meet the RF front-end filtering requirements of Wi-Fi infrastructure equipment. Its core design objective is to maintain extremely low passband loss within the 5170–5330 MHz band while providing steep rejection edges in the UNII2c-3 bands, helping systems achieve higher power output across more Wi-Fi channels and thereby enhancing network capacity and coverage performance.
Compared to systems without filters or traditional filter solutions, the QPQ1903’s BAW technology enables a cleaner “cut” along the subband boundaries of the 5 GHz spectrum, providing greater flexibility in frequency planning for applications such as tri-band Wi-Fi mesh networks and high-density enterprise-grade access points.
II. Core Technical Features
The QPQ1903’s competitive edge lies in the combination of steep skirting, low passband loss, and high power handling capability. Key specifications are as follows:
Filtering Technology: BAW (Bulky Acoustic Wave)
Operating Band: 5 GHz UNII1-2a
Frequency Range: 5170 – 5330 MHz
Bandwidth: 160 MHz
Insertion Loss (Typical): 1.5 dB
I/O Configuration: SE / SE (Single-Ended Input / Single-Ended Output)
Maximum Average Input Power: +28 dBm
Operating Temperature Range: -20°C to +95°C
Package Dimensions: 1.7 mm × 1.1 mm (Laminated Package, SMT)
RoHS : Yes
Low insertion loss means less power is wasted in the transmit path and less stress on the noise figure in the receive path. The +28 dBm average input power handling capability enables the QPQ1903 to handle high-power Wi-Fi transmission scenarios, while the extended temperature range of -20°C to +95°C covers harsh environments such as outdoor CPE and industrial-grade APs. Additionally, the device integrates a matching network, reducing the number of external passive components, which helps shorten the debugging cycle for RF engineers and minimize BOM area.
III. Typical Application Scenarios
The typical applications listed by Qorvo cover the main types of Wi-Fi infrastructure:
Wireless Access Points (APs)
The 5 GHz RF front-ends of enterprise-grade high-density APs and carrier-grade APs must simultaneously process multiple high-power signals. The QPQ1903’s combination of low loss and high suppression reduces the risk of in-band distortion while suppressing adjacent-channel leakage in the UNII2c-3 bands.
Wi-Fi 6/6E Wireless Routers
In tri-band routers, the 5 GHz band is often divided into multiple sub-bands for use. The QPQ1903’s steep filtering edges provide cleaner isolation between the UNII1-2a sub-band and adjacent sub-bands, helping to improve throughput stability during concurrent multi-stream operations.
Residential Gateways and Customer Premises Equipment (CPE)
Home gateways and 5G CPE are sensitive to cost and integration requirements. The QPQ1903’s compact laminated package and integrated matching features reduce the number of external components, helping device manufacturers complete RF front-end designs within compact PCB spaces.
Internet of Things (IoT) Gateways
IoT gateways requiring stable 5 GHz connectivity also benefit from the QPQ1903’s filtering consistency across an extended temperature range, preventing performance degradation at the band edges caused by temperature drift.
IV. Why Choose BAW Over Traditional Filters
In scenarios where the 5 GHz UNII1-2a and UNII2c-3 bands are separated by only about a 20 MHz transition band, the steepness of the filter’s edge directly determines the efficiency of spectrum resource utilization. SAW filters are limited by acoustic propagation loss and temperature stability, resulting in limited roll-off capability at high frequencies; LTCC filters, meanwhile, require a trade-off between power handling and miniaturization. BAW technology, with its higher Q-factor and steeper filter edges, can achieve narrower transition bands and higher near-end suppression within the same or even smaller packages. The QPQ1903 translates this technological advantage into an engineered combination of 1.5 dB insertion loss, 160 MHz bandwidth, and +28 dBm power, offering an option for RF front-end designs upgrading from Wi-Fi 5 to Wi-Fi 6/6E that can directly replace traditional solutions without significant modifications to the matching circuit.
V. Mingjiada Electronics Offers Immediate Availability
Shenzhen Mingjiada Electronics Co., Ltd. maintains a long-term stock of Qorvo QPQ1903 devices and is your preferred supply channel during project selection, sample verification, and mass production phases.
Founded in 1996, Mingjiada Electronics is a globally renowned authorized independent distributor of electronic components, headquartered in Shenzhen with branches in Hong Kong, Japan, Russia, and Taiwan. For Qorvo’s RF product line, Mingjiada offers immediate availability of the QPQ1903 and its compatible models, with stock routinely maintained in its Shenzhen and Hong Kong warehouses to accommodate various procurement schedules—from R&D prototyping to mass production. Leveraging a global supply chain network of over 2 million part numbers and a dual-warehouse coordination mechanism, the company provides one-stop supply services for Qorvo RF components in applications such as Wi-Fi infrastructure, 5G communications, and the Internet of Things (IoT).
To request samples or volume quotes for the QPQ1903, please contact the Mingjiada Electronics sales team directly to confirm real-time inventory and lead times.
Frequently Asked Questions (FAQ)
Q: Is the QPQ1903 a SAW or BAW filter?
A: The QPQ1903 uses bulk acoustic wave (BAW) technology, not SAW. BAW offers steeper filter edges and better power handling capabilities in the 5 GHz band.
Q: What are the package dimensions of the QPQ1903?
A: 1.7 mm × 1.1 mm, laminated package, SMT mounting.
Q: Does Mingjiada have the QPQ1903 in stock?
A: Mingjiada Electronics maintains a stock of QPQ1903 in its Shenzhen and Hong Kong warehouses. We support both sample and bulk purchases. Please contact our sales team directly to confirm real-time inventory and pricing.
Tags: QPQ1903TR13, QPQ1903TR1, QPQ1903TR, QPQ1903T, QPQ1903
Người liên hệ: Mr. Sales Manager
Tel: 86-13410018555
Fax: 86-0755-83957753